Sleep Over Motels

Additional Info

Award Winner : Modular Site Solutions (Pty) Ltd.

Architectural Excellence : The site layout is, and follows the contours of the mountain slope on which they are placed. 15 units, (split into 2 mirrored units per module providing 30 double bed sleepers) are unevenly spaced around an elliptical in shape, based largely on the existing flora, which was to remain undisturbed during the fabrication and project phases. Constructed of 40mm insulated sandwich panels, which provide high levels of insulation to keep the units cool in the heat of summer, and warm in the colder winter months, each 12m unit is split into 2, with a double bed room housing a toilet & shower on suite. Primarily north east facing, units are warm in the mornings, and provide, cool afternoon shade on the balcony’s at sunset. Externally finished in grey, with a distinct yellow panel indicating the unit number, these crisp modular units stand out from their harsh, external environment, insinuating a contrast that offers respite and relaxation to its potential occupants.

Cost Energy Effectiveness : Due to its location from our manufacturing facility, 350km (or 220 miles), transport of material and resources was always going to be a factor. The majority of material was delivered directly to site, either from the manufacturer or from branches of the primary supplier based in Polokwane. This involved lean planning and execution of supply in order to maintain stocks on site and to ensure there were no material shortages that hindered manufacture. By default, this reduced the material cost to site, and allowed for faster delivery of materials to site, than if we had supplied from our manufacturing site in Johannesburg. A further cost initiative was the use of modular units for site accommodation. In addition, canteens and ablutions were provided to the assembly staff, and this allowed for an early start and a full working day on site, all this at the cost of transport only. This reduced storage area required on site, and the associated shrinkage due to theft and damage.

Green Building Description : A primary output in the design, manufacture and future decommissioning of these facility is that would leave zero carbon footprint.
Efficient methods were used for sustainable energy practice:
-Rainwater is captured into 6 x 10 000 litre tanks from the large roofs of the various units. This is used to irrigate and supplement as grey water if necessary.
-40mm Insulated panels sandwiched between 0.5mm powder coated galvanised panels provide thermal insulation in the walls and on the roof of the units.
Panel green properties
-Aluzinc Panels Supplied – Aluzinc In 100% Recyclable
-Iso Moulders – Extruded Polystyrene is 100% Recyclable
-ArcelorMittal – External Aluzinc Coil is Environment-Friendly
-IBR sheeting clads the roof, and the shape of the IBR allows for air travel between the sheeting and the roof, helping to cool the units in the hot temperatures experienced in the area (temperatures average 32°C/90°F in summer), along with roof overhangs providing shade on the balcony’s.

Occupied Date : 2/8/2021

Owner Firm Name : Sleepover Za (Pty) Ltd

Production Start Date : 10/26/2020

Project Location City : Polokwane

Project Location State Name : Limpopo

Technical Innovation : Chassis were pre-manufactured and delivered to site at ground breaking, and carried by hand into position between the existing flora, which was to remain undisturbed. In addition to the modular chassis, an additional chassis was required to accommodate the long, split balcony required in the design, and was bolted on during the construction phase. This was clad with Saligna decking and bridges the gap between the natural flora and the units. Built with a mono pitch design, the pitch of the roof allows for the catchment of rainwater, and maximises light into the units with the high apex over the balconies. Chromadek insulated sandwich panels, corrugated on both sides, provide for good durability and thermal insulation properties. With limited site access, much of the project was kept in a knock down state until fabrication. Local labour was used to get material to each build site in manageable sizes. Material supply was direct to site as per the project timing plan.

Total Square Feet : 11260